How to choose the handle correctly and control the cost effectively

A large number of factors, such as dimensional accuracy, surface quality, changing time and tool wear, will be affected by different clamping methods. Therefore, the tool handle has a direct impact on the quality of the workpiece and processing costs. In cutting, the handle is the key interface between the tool and the machine tool. In each processing occasion, whether the correct tool handle is selected will affect many factors, such as: dimensional accuracy, surface quality, changing time and tool wear, which ultimately affects the quality and cost of the workpiece processed.

2017

08-23

The difference between dynamic balance shank and ordinary shank

What is the difference between dynamic balance shank and ordinary shank? Why do we need dynamic balancing on the handle? Technicians from HAIMER, the manufacturer of the tool handle and dynamic balancing machine in Germany, have done experiments. By balancing the inserted tool and handle, the service life of the spindle can be doubled, the cutting amount can be increased by 10%, and the tool life can be extended by more than 10%.

2017

08-23

There are special requirements for HSK shank materials

Since the emergence of HSK hollow short taper shank technology, it has been widely used in the world. It is understood that some users in Europe and North America have experienced some problems with the HSK shank. The main reason for these problems lies in the poor choice of materials for making HSK shank.

2017

08-31

Types and uses of tool handles for machining centers

Today I want to talk to you about the knowledge of machining center shank. Nowadays CNC machine tools are widely used in factories. These machine tools and tools come from all over the world, with different models and standards. Do you know what 7:24 means in the processing center BT shank? Do you know what BT, NT, JT, IT and CAT are?

2018

02-08

How to overcome deformation? Transmission box processing necessary sharps

The milling of aluminum alloy parts is a step that takes up more processing beats. The PCD finishing face milling cutter developed by Huanyu Tool adopts the integral adjustable cutter clamp design, which can not only eliminate the runout error of the tool tip, but also adopt the dense tooth structure. It not only improves the quality of the machined surface, but also improves the machining efficiency. At the same time, with the special design of the tip of the knife can also be processed in a single time when finishing the surface of the mesh.

2018

06-28

Nc handle expertise

Spindle taper holes in machining centers are usually divided into two main categories, namely the universal system with a taper of 7:24 and the HSK vacuum system with a taper of 1:10. 1. Universal shank with a taper of 7:24 usually has five standards and specifications :NT (traditional type) for short NT or ST

2017

08-23